Steering & Suspension

Results 1 - 24 of 37

Sliding Hammer Puller Set 10 piece

10 Pc Hub/Shaft puller set 90-140mm, 130-180mm.

Inner tie rod tool 33-42mm. For removing the inner tie rod ends.

Specialist universal tool for the removal of the CV joint from its shaft for cars and light commercial vehicles

Coil Spring Compressor, 300mm

Coil Spring Compressors 220mm

Strut but tool set 3 piece, for Macpherson struts designed for Volkswagen/Audi front and rear struts. Designed to hold...

Spark plug boot pliers, for safely removing spark plug connectors from the spark plugs, without damaging the wire or...

Magnetic Camber / Castor Guage

Comercial Vehicle Ball Joint Extractor 39mm

For The Replacement Of The Front Suspension Bushes On VW Polo 2002 On. Also For Seat Ibiza & Skoda Fabia. OEM Ref:...

Camber Alignment Tool, VAG, 6pcs

Drive shaft puller set 7 piece, ,for pulling drive shafts into hubs or extracting the hubs from various vehicles. Audi,...

1/2"Dr. 12Pt Hub Nut Socket Set 3pcs

Inner tie rod tool 35 & 43mm,or the easy removal and installation of track rod end knuckle, 400mm internal sleeve...

Rear Trailing Arm Damper Bush Tool BMW Series 3 (E36 / E46)

For The Front Wishbone Rear Bush (Console Bush) VW Polo, Fox, Seat Cordoba, Skoda Fabia - All 02-07 Seat Ibiza 02 On...

Rear subframe bush tool BMW X5, For the removal and installation of the rear subframe bushes on the E53 BMW X5

Rear axle bush tool Ford. Fiesta IV & Ka

Rear bush installation tool VAG. Audi A3, Golf IV & Bora

Rear subframe bush tool BMW 5 series E39 saloon 1995-2005

CV Joint Boot Installation Cone

Universal master knuckle spreader tool,for removal and Installation of Spring and Shock Strut from Steering Knuckle,...

Nut splitter set 4 piece, for releasing seized/damaged nuts,drop forged, hardened and tempered plated steel.